Call 07971483470

Send Email

Compression Testing Machine

Leading Manufacturer of compression testing machine from New Delhi.
Compression Testing Machine

Compression Testing Machine

Product Price: Rs 80,000 / UnitGet Best Price

Product Details:
Capacity10 Ton Also Available in 25, 50, 100, 200 Ton
MaterialMS
PhaseSingle Phase
Frequency50 Hz
Voltage220/240 V
Power SourceElectric

Compression Testing Machines are used to determine the compressive strength of concrete cylinders, cubes, and masonry blocks.  CTM can be operated electrically or/and Hand operated.

Loading Unit  of CTM:-

  • The hydraulic jack of is fixed to the base. The upper platen has got a self-aligning action and is attached to a screw, which passes thru the crosshead plate, and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centring pin. Loading is accomplished by the upward movement of the lower platen.
  • A dust cover is provided on the jack to prevent any dust from going into the cylinder. A spacer with a centring locating pin is provided to test small specimens. The lower and upper platens of the machine are hardened, ground and polished. Guidelines are marked on the lower platen to keep the specimen coaxial with the hydraulic jack.

Pumping Unit of CTM :-

  • The motorised pumping unit, which is housed in an elegant console is of double plunger type and is driven by a single phase 220/440 Volts 50 cycles electric motor. The pumping unit is a separate unit connected to the jack by means of a Rubber Hose Pipe. A junction box is suitable fixed to connect the motor to the mains through a push button starter.

Hose Pipe.

  • A junction box is suitable fixed to connect the motor to the mains thru a push button starter. The pumping unit is fitted with a 20 cm dia dial hydraulic Pressure Gauge with 100 division i.e. calibrated against N.C.B. Tested proving ring. A max red pointer is provided to facilitate taking readings after failure of the specimen. The Machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The Machine is Equipped with Facilities for Hand Pumping in Case of Power Failure.
  • The electric pumping unit is fixed with a micro-switch off the motor automatically as the load on the machine approaches the rated capacity Relays are incorporated in the pumping unit so that in case of breakdown of power supply, the motor will not re-start unless the starting switch is operated as fully described above but with One Pressure Gauge.
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Compression Testing Machine"?
Thank you Your Enquiry has been sent successfully.
© Innovative Lab Instruments. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.